Corrosion poses a significant challenge to pipeline safety and, according to the Department of Transportation’s Pipeline and Hazardous Materials Safety Administration (PHMSA), is one of the most prevalent causes of pipeline failures. Corrosion is a natural process and occurs when metal reacts with its immediate environment. Corrosion deteriorates metal material, thinning or completely breaking down pipeline walls. If a corroded pipe is not repaired or replaced, it is susceptible to leaks and ruptures, leading to hazardous leaks and potentially catastrophic incidents. Understanding corrosion is key to ensuring the safety and longevity of pipeline infrastructure.
Pipelines are susceptible to a variety of different corrosion forms, including pitting, uniform, galvanic, crevice, stress, and microbiologically influenced corrosion. Corrosion can occur internally or externally on a pipe.
Internal corrosion occurs as a result of reactions between the transported substance, or contaminants within the transported substance, and metal pipe material. According to PHMSA, internal corrosion accounts for approximately 60% of all pipeline incidents caused by corrosion and 12% of pipeline incidents on gas transmission, gas gathering, and hazardous liquid pipelines.
The concentration of product contaminants (such as oxygen, hydrogen sulfide, carbon dioxide, chlorides, and water), operating pressure and flow velocity, and operating temperature are some of the variables that affect corrosion inside a pipe. Reducing contaminants, applying internal pipeline coatings, and routinely cleaning pipeline interiors to get rid of residue are all ways to manage internal corrosion.
External corrosion occurs as a result of environmental factors such as soil chemistry, weather, and moisture, accounting for approximately 8% of incidents on gas transmission, gathering, and hazardous liquid pipelines.
Two ways to stop external corrosion are the use of pipeline coatings, which form a barrier between the pipeline and its surroundings, and cathodic protection systems, which employ electrical currents to stop corrosion.
When it comes to natural gas (methane), transmission lines are more likely to experience corrosion accidents than distribution lines, which are typically constructed of less-corrosive materials like plastic and run at far lower pressures.
In its 2023-2025 strategic plan the American Petroleum Institute (API) references industry data that has “shown a recent increasing trend in corrosion-related pipeline incidents over the past several years” and acknowledges that “corrosion continues to be the most frequent cause of incidents that impact people or the environment…”
A significant threat to the integrity of gas transmission and hazardous liquid pipelines, federal regulations require pipeline operators to implement integrity management programs, with specific requirements for monitoring, inspecting, and remediating both internal and external pipeline corrosion in High Consequence Areas (HCAs), or areas where pipeline releases could have greater consequences to health, safety, or the environment. The longer corrosion is allowed to worsen, the greater the risk to pipeline safety. Operators must use proactive prevention and mitigation strategies to stop corrosion from compromising their pipeline systems.
Leave a Reply